Thursday, November 3, 2011

cryptography

Posted by Unknown at 1:55 AM




1. INTRODUCTION


Does increased security provide comfort to paranoid people? Or does security provide some very basic protections that we are naive to believe that we don't need? During this time when the Internet provides essential communication between tens of millions of people and is being increasingly used as a tool for commerce, security becomes a tremendously important issue to deal with.
There are many aspects to security and many applications, ranging from secure commerce and payments to private communications and protecting passwords. One essential aspect for secure communications is that of cryptography, which is the focus of this chapter. But it is important to note that while cryptography is necessary for secure communications, it is not by itself sufficient. The reader is advised, then, that the topics covered in this chapter only describe the first of many steps necessary for better security in any number of situations.
This paper has two major purposes. The first is to define some of the terms and concepts behind basic cryptographic methods, and to offer a way to compare the myriad cryptographic schemes in use today. The second is to provide some real examples of cryptography in use today.
I would like to say at the outset that this paper is very focused on terms, concepts, and schemes in current use and is not a treatise of the whole field. No mention is made here about pre-computerized crypto schemes, the difference between a substitution and transposition cipher, cryptanalysis, or other history. Interested readers should check out some of the books in the bibliography below for this detailed — and interesting! — background information.



2. THE PURPOSE OF CRYPTOGRAPHY


Cryptography is the science of writing in secret code and is an ancient art; the first documented use of cryptography in writing dates back to circa 1900 B.C. when an Egyptian scribe used non-standard hieroglyphs in an inscription. Some experts argue that cryptography appeared spontaneously sometime after writing was invented, with applications ranging from diplomatic missives to war-time battle plans. It is no surprise, then, that new forms of cryptography came soon after the widespread development of computer communications. In data and telecommunications, cryptography is necessary when communicating over any untrusted medium, which includes just about any network, particularly the Internet.
Within the context of any application-to-application communication, there are some specific security requirements, including:
  • Authentication: The process of proving one's identity. (The primary forms of host-to-host authentication on the Internet today are name-based or address-based, both of which are notoriously weak.)
  • Privacy/confidentiality: Ensuring that no one can read the message except the intended receiver.
  • Integrity: Assuring the receiver that the received message has not been altered in any way from the original.
  • Non-repudiation: A mechanism to prove that the sender really sent this message.
Cryptography, then, not only protects data from theft or alteration, but can also be used for user authentication. There are, in general, three types of cryptographic schemes typically used to accomplish these goals: secret key (or symmetric) cryptography, public-key (or asymmetric) cryptography, and hash functions, each of which is described below. In all cases, the initial unencrypted data is referred to asplaintext. It is encrypted into ciphertext, which will in turn (usually) be decrypted into usable plaintext.
In many of the descriptions below, two communicating parties will be referred to as Alice and Bob; this is the common nomenclature in the crypto field and literature to make it easier to identify the communicating parties. If there is a third or fourth party to the communication, they will be referred to as Carol and Dave. Mallory is a malicious party, Eve is an eavesdropper, and Trent is a trusted third party.



3. TYPES OF CRYPTOGRAPHIC ALGORITHMS


There are several ways of classifying cryptographic algorithms. For purposes of this paper, they will be categorized based on the number of keys that are employed for encryption and decryption, and further defined by their application and use. The three types of algorithms that will be discussed are (Figure 1):
  • Secret Key Cryptography (SKC): Uses a single key for both encryption and decryption
  • Public Key Cryptography (PKC): Uses one key for encryption and another for decryption
  • Hash Functions: Uses a mathematical transformation to irreversibly "encrypt" information





FIGURE 1: Three types of cryptography: secret-key, public key, and hash function.






3.1. Secret Key Cryptography


With secret key cryptography, a single key is used for both encryption and decryption. As shown in Figure 1A, the sender uses the key (or some set of rules) to encrypt the plaintext and sends the ciphertext to the receiver. The receiver applies the same key (or ruleset) to decrypt the message and recover the plaintext. Because a single key is used for both functions, secret key cryptography is also calledsymmetric encryption.
With this form of cryptography, it is obvious that the key must be known to both the sender and the receiver; that, in fact, is the secret. The biggest difficulty with this approach, of course, is the distribution of the key.
Secret key cryptography schemes are generally categorized as being either stream ciphers or block ciphers. Stream ciphers operate on a single bit (byte or computer word) at a time and implement some form of feedback mechanism so that the key is constantly changing. A block cipher is so-called because the scheme encrypts one block of data at a time using the same key on each block. In general, the same plaintext block will always encrypt to the same ciphertext when using the same key in a block cipher whereas the same plaintext will encrypt to different ciphertext in a stream cipher.
Stream ciphers come in several flavors but two are worth mentioning here. Self-synchronizing stream ciphers calculate each bit in the keystream as a function of the previous n bits in the keystream. It is termed "self-synchronizing" because the decryption process can stay synchronized with the encryption process merely by knowing how far into the n-bit keystream it is. One problem is error propagation; a garbled bit in transmission will result in n garbled bits at the receiving side. Synchronous stream ciphers generate the keystream in a fashion independent of the message stream but by using the same keystream generation function at sender and receiver. While stream ciphers do not propagate transmission errors, they are, by their nature, periodic so that the keystream will eventually repeat.
Block ciphers can operate in one of several modes; the following four are the most important:
  • Electronic Codebook (ECB) mode is the simplest, most obvious application: the secret key is used to encrypt the plaintext block to form a ciphertext block. Two identical plaintext blocks, then, will always generate the same ciphertext block. Although this is the most common mode of block ciphers, it is susceptible to a variety of brute-force attacks.
  • Cipher Block Chaining (CBC) mode adds a feedback mechanism to the encryption scheme. In CBC, the plaintext is exclusively-ORed (XORed) with the previous ciphertext block prior to encryption. In this mode, two identical blocks of plaintext never encrypt to the same ciphertext.
  • Cipher Feedback (CFB) mode is a block cipher implementation as a self-synchronizing stream cipher. CFB mode allows data to be encrypted in units smaller than the block size, which might be useful in some applications such as encrypting interactive terminal input. If we were using 1-byte CFB mode, for example, each incoming character is placed into a shift register the same size as the block, encrypted, and the block transmitted. At the receiving side, the ciphertext is decrypted and the extra bits in the block (i.e., everything above and beyond the one byte) are discarded.
  • Output Feedback (OFB) mode is a block cipher implementation conceptually similar to a synchronous stream cipher. OFB prevents the same plaintext block from generating the same ciphertext block by using an internal feedback mechanism that is independent of both the plaintext and ciphertext bitstreams.
A nice overview of these different modes can be found at progressive-coding.com.
Secret key cryptography algorithms that are in use today include:
  • Data Encryption Standard (DES): The most common SKC scheme used today, DES was designed by IBM in the 1970s and adopted by the National Bureau of Standards (NBS) [now the National Institute for Standards and Technology (NIST)] in 1977 for commercial and unclassified government applications. DES is a block-cipher employing a 56-bit key that operates on 64-bit blocks. DES has a complex set of rules and transformations that were designed specifically to yield fast hardware implementations and slow software implementations, although this latter point is becoming less significant today since the speed of computer processors is several orders of magnitude faster today than twenty years ago. IBM also proposed a 112-bit key for DES, which was rejected at the time by the government; the use of 112-bit keys was considered in the 1990s, however, conversion was never seriously considered.
    DES is defined in American National Standard X3.92 and three Federal Information Processing Standards (FIPS):
    Information about vulnerabilities of DES can be obtained from the Electronic Frontier Foundation.
    Two important variants that strengthen DES are:
    • Triple-DES (3DES): A variant of DES that employs up to three 56-bit keys and makes three encryption/decryption passes over the block; 3DES is also described in FIPS 46-3 and is the recommended replacement to DES.
    • DESX: A variant devised by Ron Rivest. By combining 64 additional key bits to the plaintext prior to encryption, effectively increases the keylength to 120 bits.
    More detail about DES, 3DES, and DESX can be found below in Section 5.4.
  • Advanced Encryption Standard (AES): In 1997, NIST initiated a very public, 4-1/2 year process to develop a new secure cryptosystem for U.S. government applications. The result, the Advanced Encryption Standard, became the official successor to DES in December 2001. AES uses an SKC scheme called Rijndael, a block cipher designed by Belgian cryptographers Joan Daemen and Vincent Rijmen. The algorithm can use a variable block length and key length; the latest specification allowed any combination of keys lengths of 128, 192, or 256 bits and blocks of length 128, 192, or 256 bits. NIST initially selected Rijndael in October 2000 and formal adoption as the AES standard came in December 2001. FIPS PUB 197 describes a 128-bit block cipher employing a 128-, 192-, or 256-bit key. The AES process and Rijndael algorithm are described in more detail below in Section 5.9.
  • CAST-128/256: CAST-128, described in Request for Comments (RFC) 2144, is a DES-like substitution-permutation crypto algorithm, employing a 128-bit key operating on a 64-bit block. CAST-256 (RFC 2612) is an extension of CAST-128, using a 128-bit block size and a variable length (128, 160, 192, 224, or 256 bit) key. CAST is named for its developers, Carlisle Adams and Stafford Tavares and is available internationally. CAST-256 was one of the Round 1 algorithms in the AES process.
  • International Data Encryption Algorithm (IDEA): Secret-key cryptosystem written by Xuejia Lai and James Massey, in 1992 and patented by Ascom; a 64-bit SKC block cipher using a 128-bit key. Also available internationally.
  • Rivest Ciphers (aka Ron's Code): Named for Ron Rivest, a series of SKC algorithms.
    • RC1: Designed on paper but never implemented.
    • RC2: A 64-bit block cipher using variable-sized keys designed to replace DES. It's code has not been made public although many companies have licensed RC2 for use in their products. Described in RFC 2268.
    • RC3: Found to be breakable during development.
    • RC4: A stream cipher using variable-sized keys; it is widely used in commercial cryptography products, although it can only be exported using keys that are 40 bits or less in length.
    • RC5: A block-cipher supporting a variety of block sizes, key sizes, and number of encryption passes over the data. Described in RFC 2040.
    • RC6: An improvement over RC5, RC6 was one of the AES Round 2 algorithms.
  • Blowfish: A symmetric 64-bit block cipher invented by Bruce Schneier; optimized for 32-bit processors with large data caches, it is significantly faster than DES on a Pentium/PowerPC-class machine. Key lengths can vary from 32 to 448 bits in length. Blowfish, available freely and intended as a substitute for DES or IDEA, is in use in over 80 products.
  • Twofish: A 128-bit block cipher using 128-, 192-, or 256-bit keys. Designed to be highly secure and highly flexible, well-suited for large microprocessors, 8-bit smart card microprocessors, and dedicated hardware. Designed by a team led by Bruce Schneier and was one of the Round 2 algorithms in the AES process.
  • Camellia: A secret-key, block-cipher crypto algorithm developed jointly by Nippon Telegraph and Telephone (NTT) Corp. and Mitsubishi Electric Corporation (MEC) in 2000. Camellia has some characteristics in common with AES: a 128-bit block size, support for 128-, 192-, and 256-bit key lengths, and suitability for both software and hardware implementations on common 32-bit processors as well as 8-bit processors (e.g., smart cards, cryptographic hardware, and embedded systems). Also described in RFC 3713. Camellia's application in IPsec is described in RFC 4312 and application in OpenPGP in RFC 5581.
  • MISTY1: Developed at Mitsubishi Electric Corp., a block cipher using a 128-bit key and 64-bit blocks, and a variable number of rounds. Designed for hardware and software implementations, and is resistant to differential and linear cryptanalysis. Described in RFC 2994.
  • Secure and Fast Encryption Routine (SAFER): Secret-key crypto scheme designed for implementation in software. Versions have been defined for 40-, 64-, and 128-bit keys.
  • KASUMI: A block cipher using a 128-bit key that is part of the Third-Generation Partnership Project (3gpp), formerly known as the Universal Mobile Telecommunications System (UMTS). KASUMI is the intended confidentiality and integrity algorithm for both message content and signaling data for emerging mobile communications systems.
  • SEED: A block cipher using 128-bit blocks and 128-bit keys. Developed by the Korea Information Security Agency (KISA) and adopted as a national standard encryption algorithm in South Korea. Also described in RFC 4269.
  • ARIA: A 128-bit block cipher employing 128-, 192-, and 256-bit keys. Developed by large group of researchers from academic institutions, research institutes, and federal agencies in South Korea in 2003, and subsequently named a national standard. Described in RFC 5794.
  • CLEFIA: Described in RFC 6114, CLEFIA is a 128-bit block cipher employing key lengths of 128, 192, and 256 bits (which is compatible with AES). The CLEFIA algorithm was first published in 2007 by Sony Corporation. CLEFIA is one of the new-generation lightweight blockcipher algorithms designed after AES, offering high performance in software and hardware as well as a lightweight implementation in hardware.
  • SMS4: SMS4 is a 128-bit block cipher using 128-bit keys and 32 rounds to process a block. Declassified in 2006, SMS4 is used in the Chinese National Standard for Wireless Local Area Network (LAN) Authentication and Privacy Infrastructure (WAPI). SMS4 had been a proposed cipher for the Institute of Electrical and Electronics Engineers (IEEE) 802.11i standard on security mechanisms for wireless LANs, but has yet to be accepted by the IEEE or International Organization for Standardization (ISO). SMS4 is described in SMS4 Encryption Algorithm for Wireless Networks (translated and typeset by Whitfield Diffie and George Ledin, 2008) or in the original Chinese.
  • Skipjack: SKC scheme proposed for Capstone. Although the details of the algorithm were never made public, Skipjack was a block cipher using an 80-bit key and 32 iteration cycles per 64-bit block.

3.2. Public-Key Cryptography


Public-key cryptography has been said to be the most significant new development in cryptography in the last 300-400 years. Modern PKC was first described publicly by Stanford University professor Martin Hellman and graduate student Whitfield Diffie in 1976. Their paper described a two-key crypto system in which two parties could engage in a secure communication over a non-secure communications channel without having to share a secret key.
PKC depends upon the existence of so-called one-way functions, or mathematical functions that are easy to computer whereas their inverse function is relatively difficult to compute. Let me give you two simple examples:
  1. Multiplication vs. factorization: Suppose I tell you that I have two numbers, 9 and 16, and that I want to calculate the product; it should take almost no time to calculate the product, 144. Suppose instead that I tell you that I have a number, 144, and I need you tell me which pair of integers I multiplied together to obtain that number. You will eventually come up with the solution but whereas calculating the product took milliseconds, factoring will take longer because you first need to find the 8 pairs of integer factors and then determine which one is the correct pair.
  2. Exponentiation vs. logarithms: Suppose I tell you that I want to take the number 3 to the 6th power; again, it is easy to calculate 36=729. But if I tell you that I have the number 729 and want you to tell me the two integers that I used, x and y so that logx 729 = y, it will take you longer to find all possible solutions and select the pair that I used.
While the examples above are trivial, they do represent two of the functional pairs that are used with PKC; namely, the ease of multiplication and exponentiation versus the relative difficulty of factoring and calculating logarithms, respectively. The mathematical "trick" in PKC is to find a trap door in the one-way function so that the inverse calculation becomes easy given knowledge of some item of information. (The problem is further exacerbated because the algorithms don't use just any old integers, but very large prime numbers.)
Generic PKC employs two keys that are mathematically related although knowledge of one key does not allow someone to easily determine the other key. One key is used to encrypt the plaintext and the other key is used to decrypt the ciphertext. The important point here is that it does not matter which key is applied first, but that both keys are required for the process to work (Figure 1B). Because a pair of keys are required, this approach is also called asymmetric cryptography.
In PKC, one of the keys is designated the public key and may be advertised as widely as the owner wants. The other key is designated the private key and is never revealed to another party. It is straight forward to send messages under this scheme. Suppose Alice wants to send Bob a message. Alice encrypts some information using Bob's public key; Bob decrypts the ciphertext using his private key. This method could be also used to prove who sent a message; Alice, for example, could encrypt some plaintext with her private key; when Bob decrypts using Alice's public key, he knows that Alice sent the message and Alice cannot deny having sent the message (non-repudiation).
Public-key cryptography algorithms that are in use today for key exchange or digital signatures include:
  • RSA: The first, and still most common, PKC implementation, named for the three MIT mathematicians who developed it — Ronald Rivest, Adi Shamir, and Leonard Adleman. RSA today is used in hundreds of software products and can be used for key exchange, digital signatures, or encryption of small blocks of data. RSA uses a variable size encryption block and a variable size key. The key-pair is derived from a very large number, n, that is the product of two prime numbers chosen according to special rules; these primes may be 100 or more digits in length each, yielding an n with roughly twice as many digits as the prime factors. The public key information includes n and a derivative of one of the factors of n; an attacker cannot determine the prime factors of n (and, therefore, the private key) from this information alone and that is what makes the RSA algorithm so secure. (Some descriptions of PKC erroneously state that RSA's safety is due to the difficulty in factoring large prime numbers. In fact, large prime numbers, like small prime numbers, only have two factors!) The ability for computers to factor large numbers, and therefore attack schemes such as RSA, is rapidly improving and systems today can find the prime factors of numbers with more than 200 digits. Nevertheless, if a large number is created from two prime factors that are roughly the same size, there is no known factorization algorithm that will solve the problem in a reasonable amount of time; a 2005 test to factor a 200-digit number took 1.5 years and over 50 years of compute time (see the Wikipedia article on integer factorization.) Regardless, one presumed protection of RSA is that users can easily increase the key size to always stay ahead of the computer processing curve. As an aside, the patent for RSA expired in September 2000 which does not appear to have affected RSA's popularity one way or the other. A detailed example of RSA is presented below in Section 5.3.
  • Diffie-Hellman: After the RSA algorithm was published, Diffie and Hellman came up with their own algorithm. D-H is used for secret-key key exchange only, and not for authentication or digital signatures. More detail about Diffie-Hellman can be found below in Section 5.2.
  • Digital Signature Algorithm (DSA): The algorithm specified in NIST's Digital Signature Standard (DSS), provides digital signature capability for the authentication of messages.
  • ElGamal: Designed by Taher Elgamal, a PKC system similar to Diffie-Hellman and used for key exchange.
  • Elliptic Curve Cryptography (ECC): A PKC algorithm based upon elliptic curves. ECC can offer levels of security with small keys comparable to RSA and other PKC methods. It was designed for devices with limited compute power and/or memory, such as smartcards and PDAs. More detail about ECC can be found below in Section 5.8. Other references include "The Importance of ECC" Web page and the "Online Elliptic Curve Cryptography Tutorial", both from Certicom. See also RFC 6090 for a review of fundamental ECC algorithms.
  • Public-Key Cryptography Standards (PKCS): A set of interoperable standards and guidelines for public-key cryptography, designed by RSA Data Security Inc.
    • PKCS #1: RSA Cryptography Standard (Also RFC 3447)
    • PKCS #2: Incorporated into PKCS #1.
    • PKCS #3: Diffie-Hellman Key-Agreement Standard
    • PKCS #4: Incorporated into PKCS #1.
    • PKCS #5: Password-Based Cryptography Standard (PKCS #5 V2.0 is also RFC 2898)
    • PKCS #6: Extended-Certificate Syntax Standard (being phased out in favor of X.509v3)
    • PKCS #7: Cryptographic Message Syntax Standard (Also RFC 2315)
    • PKCS #8: Private-Key Information Syntax Standard (Also RFC 5208)
    • PKCS #9: Selected Attribute Types (Also RFC 2985)
    • PKCS #10: Certification Request Syntax Standard (Also RFC 2986)
    • PKCS #11: Cryptographic Token Interface Standard
    • PKCS #12: Personal Information Exchange Syntax Standard
    • PKCS #13: Elliptic Curve Cryptography Standard
    • PKCS #14: Pseudorandom Number Generation Standard is no longer available
    • PKCS #15: Cryptographic Token Information Format Standard
  • Cramer-Shoup: A public-key cryptosystem proposed by R. Cramer and V. Shoup of IBM in 1998.
  • Key Exchange Algorithm (KEA): A variation on Diffie-Hellman; proposed as the key exchange method for Capstone.
  • LUC: A public-key cryptosystem designed by P.J. Smith and based on Lucas sequences. Can be used for encryption and signatures, using integer factoring.
For additional information on PKC algorithms, see "Public-Key Encryption", Chapter 8 in Handbook of Applied Cryptography, by A. Menezes, P. van Oorschot, and S. Vanstone (CRC Press, 1996).
A digression: Who invented PKC? I tried to be careful in the first paragraph of this section to state that Diffie and Hellman "first described publicly" a PKC scheme. Although I have categorized PKC as a two-key system, that has been merely for convenience; the real criteria for a PKC scheme is that it allows two parties to exchange a secret even though the communication with the shared secret might be overheard. There seems to be no question that Diffie and Hellman were first to publish; their method is described in the classic paper, "New Directions in Cryptography," published in the November 1976 issue of IEEE Transactions on Information Theory. As shown below, Diffie-Hellman uses the idea that finding logarithms is relatively harder than exponentiation. And, indeed, it is the precursor to modern PKC which does employ two keys. Rivest, Shamir, and Adleman described an implementation that extended this idea in their paper "A Method for Obtaining Digital Signatures and Public-Key Cryptosystems," published in the February 1978 issue of the Communications of the ACM (CACM). Their method, of course, is based upon the relative ease of finding the product of two large prime numbers compared to finding the prime factors of a large number.
Some sources, though, credit Ralph Merkle with first describing a system that allows two parties to share a secret although it was not a two-key system, per se. A Merkle Puzzle works where Alice creates a large number of encrypted keys, sends them all to Bob so that Bob chooses one at random and then lets Alice know which he has selected. An eavesdropper will see all of the keys but can't learn which key Bob has selected (because he has encrypted the response with the chosen key). In this case, Eve's effort to break in is the square of the effort of Bob to choose a key. While this difference may be small it is often sufficient. Merkle apparently took a computer science course at UC Berkeley in 1974 and described his method, but had difficulty making people understand it; frustrated, he dropped the course. Meanwhile, he submitted the paper "Secure Communication Over Insecure Channels" which was published in the CACM in April 1978; Rivest et al.'s paper even makes reference to it. Merkle's method certainly wasn't published first, but did he have the idea first?
An interesting question, maybe, but who really knows? For some time, it was a quiet secret that a team at the UK's Government Communications Headquarters (GCHQ) had first developed PKC in the early 1970s. Because of the nature of the work, GCHQ kept the original memos classified. In 1997, however, the GCHQ changed their posture when they realized that there was nothing to gain by continued silence. Documents show that a GCHQ mathematician named James Ellis started research into the key distribution problem in 1969 and that by 1975, Ellis, Clifford Cocks, and Malcolm Williamson had worked out all of the fundamental details of PKC, yet couldn't talk about their work. (They were, of course, barred from challenging the RSA patent!) After more than 20 years, Ellis, Cocks, and Williamson have begun to get their due credit.
And the National Security Agency (NSA) claims to have knowledge of this type of algorithm as early as 1966 but there is no supporting documentation... yet. So this really was a digression...

3.3. Hash Functions


Hash functions, also called message digests and one-way encryption, are algorithms that, in some sense, use no key (Figure 1C). Instead, a fixed-length hash value is computed based upon the plaintext that makes it impossible for either the contents or length of the plaintext to be recovered. Hash algorithms are typically used to provide a digital fingerprint of a file's contents, often used to ensure that the file has not been altered by an intruder or virus. Hash functions are also commonly employed by many operating systems to encrypt passwords. Hash functions, then, provide a measure of the integrity of a file.
Hash algorithms that are in common use today include:
  • Message Digest (MD) algorithms: A series of byte-oriented algorithms that produce a 128-bit hash value from an arbitrary-length message.
    • MD2 (RFC 1319): Designed for systems with limited memory, such as smart cards. (MD2 has been relegated to historical status, per RFC 6149.)
    • MD4 (RFC 1320): Developed by Rivest, similar to MD2 but designed specifically for fast processing in software. (MD4 has been relegated to historical status, per RFC 6150.)
    • MD5 (RFC 1321): Also developed by Rivest after potential weaknesses were reported in MD4; this scheme is similar to MD4 but is slower because more manipulation is made to the original data. MD5 has been implemented in a large number of products although several weaknesses in the algorithm were demonstrated by German cryptographer Hans Dobbertin in 1996 ("Cryptanalysis of MD5 Compress").
  • Secure Hash Algorithm (SHA): Algorithm for NIST's Secure Hash Standard (SHS). SHA-1 produces a 160-bit hash value and was originally published as FIPS 180-1 and RFC 3174. FIPS 180-2(aka SHA-2) describes five algorithms in the SHS: SHA-1 plus SHA-224, SHA-256, SHA-384, and SHA-512 which can produce hash values that are 224, 256, 384, or 512 bits in length, respectively. SHA-224, -256, -384, and -512 are also described in RFC 4634.
  • RIPEMD: A series of message digests that initially came from the RIPE (RACE Integrity Primitives Evaluation) project. RIPEMD-160 was designed by Hans Dobbertin, Antoon Bosselaers, and Bart Preneel, and optimized for 32-bit processors to replace the then-current 128-bit hash functions. Other versions include RIPEMD-256, RIPEMD-320, and RIPEMD-128.
  • HAVAL (HAsh of VAriable Length): Designed by Y. Zheng, J. Pieprzyk and J. Seberry, a hash algorithm with many levels of security. HAVAL can create hash values that are 128, 160, 192, 224, or 256 bits in length.
  • Whirlpool: A relatively new hash function, designed by V. Rijmen and P.S.L.M. Barreto. Whirlpool operates on messages less than 2256 bits in length, and produces a message digest of 512 bits. The design of this has function is very different than that of MD5 and SHA-1, making it immune to the same attacks as on those hashes (see below).
  • Tiger: Designed by Ross Anderson and Eli Biham, Tiger is designed to be secure, run efficiently on 64-bit processors, and easily replace MD4, MD5, SHA and SHA-1 in other applications. Tiger/192 produces a 192-bit output and is compatible with 64-bit architectures; Tiger/128 and Tiger/160 produce a hash of length 128 and 160 bits, respectively, to provide compatibility with the other hash functions mentioned above.
(Readers might be interested in HashCalc, a Windows-based program that calculates hash values using a dozen algorithms, including MD5, SHA-1 and several variants, RIPEMD-160, and Tiger. Command line utilities that calculate hash values include sha_verify by Dan Mares [Windows; supports MD5, SHA-1, SHA-2] and md5deep [cross-platform; supports MD5, SHA-1, SHA-256, Tiger, and Whirlpool].)
Hash functions are sometimes misunderstood and some sources claim that no two files can have the same hash value. This is, in fact, not correct. Consider a hash function that provides a 128-bit hash value. There are, obviously, 2128 possible hash values. But there are a lot more than 2128 possible files. Therefore, there have to be multiple files — in fact, there have to be an infinite number of files! — that can have the same 128-bit hash value.
The difficulty is finding two files with the same hash! What is, indeed, very hard to do is to try to create a file that has a given hash value so as to force a hash value collision — which is the reason that hash functions are used extensively for information security and computer forensics applications. Alas, researchers in 2004 found that practical collision attacks could be launched on MD5, SHA-1, and other hash algorithms. Readers interested in this problem should read the following:
Readers are also referred to the Eindhoven University of Technology HashClash Project Web site. An excellent overview of the situation with hash collisions (circa 2005) can be found in RFC 4270 (by P. Hoffman and B. Schneier, November 2005). And for additional information on hash functions, see David Hopwood's MessageDigest Algorithms page.
At this time, there is no obvious successor to MD5 and SHA-1 that could be put into use quickly; there are so many products using these hash functions that it could take many years to flush out all use of 128- and 160-bit hashes. That said, NIST announced in 2007 their Cryptographic Hash Algorithm Competition to find the next-generation secure hashing method. Dubbed SHA-3, this new scheme will augment FIPS 180-2. A list of submissions can be found at The SHA-3 Zoo. The SHA-3 standard may not be available until 2011 or 2012.
Certain extensions of hash functions are used for a variety of information security and digital forensics applications, such as:
  • Hash libraries are sets of hash values corresponding to known files. A hash library of known good files, for example, might be a set of files known to be a part of an operating system, while a hash library of known bad files might be of a set of known child pornographic images.
  • Rolling hashes refer to a set of hash values that are computed based upon a fixed-length "sliding window" through the input. As an example, a hash value might be computed on bytes 1-10 of a file, then on bytes 2-11, 3-12, 4-13, etc.
  • Fuzzy hashes are an area of intense research and represent hash values that represent two inputs that are similar. Fuzzy hashes are used to detect documents, images, or other files that are close to each other with respect to content. See "Fuzzy Hashing" (PDF | PPT) by Jesse Kornblum for a good treatment of this topic.

3.4. Why Three Encryption Techniques?


So, why are there so many different types of cryptographic schemes? Why can't we do everything we need with just one?
The answer is that each scheme is optimized for some specific application(s). Hash functions, for example, are well-suited for ensuring data integrity because any change made to the contents of a message will result in the receiver calculating a different hash value than the one placed in the transmission by the sender. Since it is highly unlikely that two different messages will yield the same hash value, data integrity is ensured to a high degree of confidence.
Secret key cryptography, on the other hand, is ideally suited to encrypting messages, thus providing privacy and confidentiality. The sender can generate a session key on a per-message basis to encrypt the message; the receiver, of course, needs the same session key to decrypt the message.
Key exchange, of course, is a key application of public-key cryptography (no pun intended). Asymmetric schemes can also be used for non-repudiation and user authentication; if the receiver can obtain the session key encrypted with the sender's private key, then only this sender could have sent the message. Public-key cryptography could, theoretically, also be used to encrypt messages although this is rarely done because secret-key cryptography operates about 1000 times faster than public-key cryptography.





FIGURE 2: Sample application of the three cryptographic techniques for secure communication.




Figure 2 puts all of this together and shows how a hybrid cryptographic scheme combines all of these functions to form a secure transmission comprising digital signature and digital envelope. In this example, the sender of the message is Alice and the receiver is Bob.
A digital envelope comprises an encrypted message and an encrypted session key. Alice uses secret key cryptography to encrypt her message using the session key, which she generates at random with each session. Alice then encrypts the session key using Bob's public key. The encrypted message and encrypted session key together form the digital envelope. Upon receipt, Bob recovers the session secret key using his private key and then decrypts the encrypted message.
The digital signature is formed in two steps. First, Alice computes the hash value of her message; next, she encrypts the hash value with her private key. Upon receipt of the digital signature, Bob recovers the hash value calculated by Alice by decrypting the digital signature with Alice's public key. Bob can then apply the hash function to Alice's original message, which he has already decrypted (see previous paragraph). If the resultant hash value is not the same as the value supplied by Alice, then Bob knows that the message has been altered; if the hash values are the same, Bob should believe that the message he received is identical to the one that Alice sent.
This scheme also provides nonrepudiation since it proves that Alice sent the message; if the hash value recovered by Bob using Alice's public key proves that the message has not been altered, then only Alice could have created the digital signature. Bob also has proof that he is the intended receiver; if he can correctly decrypt the message, then he must have correctly decrypted the session key meaning that his is the correct private key.

3.5. The Significance of Key Length


In a recent article in the industry literature (circa 9/98), a writer made the claim that 56-bit keys do not provide as sufficient protection for DES today as they did in 1975 because computers are 1000 times faster today than in 1975. Therefore, the writer went on, we should be using 56,000-bit keys today instead of 56-bit keys to provide adequate protection. The conclusion was then drawn that because 56,000-bit keys are infeasible (true), we should accept the fact that we have to live with weak cryptography (false!). The major error here is that the writer did not take into account that the number of possible key values double whenever a single bit is added to the key length; thus, a 57-bit key has twice as many values as a 56-bit key (because 257 is two times 256). In fact, a 66-bit key would have 1024 times the possible values as a 56-bit key.
But this does bring up the issue, what is the precise significance of key length as it affects the level of protection?
In cryptography, size does matter. The larger the key, the harder it is to crack a block of encrypted data. The reason that large keys offer more protection is almost obvious; computers have made it easier to attack ciphertext by using brute force methods rather than by attacking the mathematics (which are generally well-known anyway). With a brute force attack, the attacker merely generates every possible key and applies it to the ciphertext. Any resulting plaintext that makes sense offers a candidate for a legitimate key. This was the basis, of course, of the EFF's attack on DES.
Until the mid-1990s or so, brute force attacks were beyond the capabilities of computers that were within the budget of the attacker community. Today, however, significant compute power is commonly available and accessible. General purpose computers such as PCs are already being used for brute force attacks. For serious attackers with money to spend, such as some large companies or governments, Field Programmable Gate Array (FPGA) or Application-Specific Integrated Circuits (ASIC) technology offers the ability to build specialized chips that can provide even faster and cheaper solutions than a PC. Consider that an AT&T ORCA chip (FPGA) costs $200 and can test 30 million DES keys per second, while a $10 ASIC chip can test 200 million DES keys per second (compared to a PC which might be able to test 40,000 keys per second).
The table below shows what DES key sizes are needed to protect data from attackers with different time and financial resources. This information is not merely academic; one of the basic tenets of any security system is to have an idea of what you are protecting and from who are you protecting it! The table clearly shows that a 40-bit key is essentially worthless today against even the most unsophisticated attacker. On the other hand, 56-bit keys are fairly strong unless you might be subject to some pretty serious corporate or government espionage. But note that even 56-bit keys are declining in their value and that the times in the table (1995 data) are worst cases.


TABLE 1. Minimum Key Lengths for Symmetric Ciphers.
Type of AttackerBudgetToolTime and Cost
Per Key Recovered		Key Length Needed
For Protection
In Late-1995
40 bits56 bits
Pedestrian HackerTinyScavanged
computer
time		1 weekInfeasible45
$400FPGA5 hours
($0.08)		38 years
($5,000)		50
Small Business$10,000FPGA12 minutes
($0.08)		18 months
($5,000)		55
Corporate Department$300KFPGA24 seconds
($0.08)		19 days
($5,000)		60
ASIC0.18 seconds
($0.001)		3 hours
($38)
Big Company$10MFPGA7 seconds
($0.08)		13 hours
($5,000)		70
ASIC0.005 seconds
($0.001)		6 minutes
($38)
Intelligence Agency$300MASIC0.0002 seconds
($0.001)		12 seconds
($38)		75




So, how big is big enough? DES, invented in 1975, is still in use today, nearly 25 years later. If we take that to be a design criteria (i.e., a 20-plus year lifetime) and we believe Moore's Law ("computing power doubles every 18 months"), then a key size extension of 14 bits (i.e., a factor of more than 16,000) should be adequate. The 1975 DES proposal suggested 56-bit keys; by 1995, a 70-bit key would have been required to offer equal protection and an 85-bit key will be necessary by 2015.
The discussion above suggests that a 128- or 256-bit key for SKC will suffice for some time because that key length keeps us ahead of the brute force capabilities of the attackers. While a large key is good, a huge key may not always be better. That is, many public-key cryptosystems use 1024- or 2048-bit keys; expanding the key to 4096 bits probably doesn't add any protection at this time but it does add significantly to processing time.
The most effective large-number factoring methods today use a mathematical Number Field Sieve to find a certain number of relationships and then uses a matrix operation to solve a linear equation to produce the two prime factors. The sieve step actually involves a large number of operations of operations that can be performed in parallel; solving the linear equation, however, requires a supercomputer. Indeed, finding the solution to the RSA-140 challenge in February 1999 — factoring a 140-digit (465-bit) prime number — required 200 computers across the Internet about 4 weeks for the first step and a Cray computer 100 hours and 810 MB of memory to do the second step.
In early 1999, Shamir (of RSA fame) described a new machine that could increase factorization speed by 2-3 orders of magnitude. Although no detailed plans were provided nor is one known to have been built, the concepts of TWINKLE (The Weizmann Institute Key Locating Engine) could result in a specialized piece of hardware that would cost about $5000 and have the processing power of 100-1000 PCs. There still appear to be many engineering details that have to be worked out before such a machine could be built. Furthermore, the hardware improves the sieve step only; the matrix operation is not optimized at all by this design and the complexity of this step grows rapidly with key length, both in terms of processing time and memory requirements. Nevertheless, this plan conceptually puts 512-bit keys within reach of being factored. Although most PKC schemes allow keys that are 1024 bits and longer, Shamir claims that 512-bit RSA keys "protect 95% of today's E-commerce on the Internet." (See Bruce Schneier'sCrypto-Gram (May 15, 1999) for more information, as well as the comments from RSA Labs.)
It is also interesting to note that while cryptography is good and strong cryptography is better, long keys may disrupt the nature of the randomness of data files. Shamir and van Someren ("Playing hide and seek with stored keys") have noted that a new generation of viruses can be written that will find files encrypted with long keys, making them easier to find by intruders and, therefore, more prone to attack.
Finally, U.S. government policy has tightly controlled the export of crypto products since World War II. Until recently, export outside of North America of cryptographic products using keys greater than 40 bits in length was prohibited, which made those products essentially worthless in the marketplace, particularly for electronic commerce. More recently, the U.S. Commerce Department relaxed the regulations, allowing the general export of 56-bit SKC and 1024-bit PKC products (certain sectors, such as health care and financial, allow the export of products with even larger keys). The Commerce Department's Bureau of Export Administration maintains a Commercial Encryption Export Controls web page with more information. The potential impact of this policy on U.S. businesses is well beyond the scope of this paper.
Much of the discussion above, including the table, are based on the paper "Minimal Key Lengths for Symmetric Ciphers to Provide Adequate Commercial Security" by M. Blaze, W. Diffie, R.L. Rivest, B. Schneier, T. Shimomura, E. Thompson, and M. Wiener.
On a related topic, public key crypto schemes can be used for several purposes, including key exchange, digital signatures, authentication, and more. In those PKC systems used for SKC key exchange, the PKC key lengths are chosen so to be resistant to some selected level of attack. The length of the secret keys exchanged via that system have to have at least the same level of attack resistance. Thus, the three parameters of such a system — system strength, secret key strength, and public key strength — must be matched. This topic is explored in more detail in Determining Strengths For Public Keys Used For Exchanging Symmetric Keys (RFC 3766).



4. TRUST MODELS


Secure use of cryptography requires trust. While secret key cryptography can ensure message confidentiality and hash codes can ensure integrity, none of this works without trust. In SKC, Alice and Bob had to share a secret key. PKC solved the secret distribution problem, but how does Alice really know that Bob is who he says he is? Just because Bob has a public and private key, and purports to be "Bob," how does Alice know that a malicious person (Mallory) is not pretending to be Bob?
There are a number of trust models employed by various cryptographic schemes. This section will explore three of them:
  • The web of trust employed by Pretty Good Privacy (PGP) users, who hold their own set of trusted public keys.
  • Kerberos, a secret key distribution scheme using a trusted third party.
  • Certificates, which allow a set of trusted third parties to authenticate each other and, by implication, each other's users.
Each of these trust models differs in complexity, general applicability, scope, and scalability.

4.1. PGP Web of Trust


Pretty Good Privacy (described more below in Section 5.5) is a widely used private e-mail scheme based on public key methods. A PGP user maintains a local keyring of all their known and trusted public keys. The user makes their own determination about the trustworthiness of a key using what is called a "web of trust."
If Alice needs Bob's public key, Alice can ask Bob for it in another e-mail or, in many cases, download the public key from an advertised server; this server might a well-known PGP key repository or a site that Bob maintains himself. In fact, Bob's public key might be stored or listed in many places. (The author's public key, for example, can be found at http://www.garykessler.net/kumquat_pubkey.html.) Alice is prepared to believe that Bob's public key, as stored at these locations, is valid.
Suppose Carol claims to hold Bob's public key and offers to give the key to Alice. How does Alice know that Carol's version of Bob's key is valid or if Carol is actually giving Alice a key that will allow Mallory access to messages? The answer is, "It depends." If Alice trusts Carol and Carol says that she thinks that her version of Bob's key is valid, then Alice may — at her option — trust that key. And trust is not necessarily transitive; if Dave has a copy of Bob's key and Carol trusts Dave, it does not necessarily follow that Alice trusts Dave even if she does trust Carol.
The point here is that who Alice trusts and how she makes that determination is strictly up to Alice. PGP makes no statement and has no protocol about how one user determines whether they trust another user or not. In any case, encryption and signatures based on public keys can only be used when the appropriate public key is on the user's keyring.

4.2. Kerberos


Kerberos is a commonly used authentication scheme on the Internet. Developed by MIT's Project Athena, Kerberos is named for the three-headed dog who, according to Greek mythology, guards the entrance of Hades (rather than the exit, for some reason!).
Kerberos employs a client/server architecture and provides user-to-server authentication rather than host-to-host authentication. In this model, security and authentication will be based on secret key technology where every host on the network has its own secret key. It would clearly be unmanageable if every host had to know the keys of all other hosts so a secure, trusted host somewhere on the network, known as a Key Distribution Center (KDC), knows the keys for all of the hosts (or at least some of the hosts within a portion of the network, called a realm). In this way, when a new node is brought online, only the KDC and the new node need to be configured with the node's key; keys can be distributed physically or by some other secure means.





FIGURE 3: Kerberos architecture.


The Kerberos Server/KDC has two main functions (Figure 3), known as the Authentication Server (AS) and Ticket-Granting Server (TGS). The steps in establishing an authenticated session between an application client and the application server are:
  1. The Kerberos client software establishes a connection with the Kerberos server's AS function. The AS first authenticates that the client is who it purports to be. The AS then provides the client with a secret key for this login session (the TGS session key) and a ticket-granting ticket (TGT), which gives the client permission to talk to the TGS. The ticket has a finite lifetime so that the authentication process is repeated periodically.
  2. The client now communicates with the TGS to obtain the Application Server's key so that it (the client) can establish a connection to the service it wants. The client supplies the TGS with the TGS session key and TGT; the TGS responds with an application session key (ASK) and an encrypted form of the Application Server's secret key; this secret key is never sent on the network in any other form.
  3. The client has now authenticated itself and can prove its identity to the Application Server by supplying the Kerberos ticket, application session key, and encrypted Application Server secret key. The Application Server responds with similarly encrypted information to authenticate itself to the client. At this point, the client can initiate the intended service requests (e.g., Telnet, FTP, HTTP, or e-commerce transaction session establishment).

The current shipping version of this protocol is Kerberos V5 (described in RFC 1510), although Kerberos V4 still exists and is seeing some use. While the details of their operation, functional capabilities, and message formats are different, the conceptual overview above pretty much holds for both. One primary difference is that Kerberos V4 uses only DES to generate keys and encrypt messages, while V5 allows other schemes to be employed (although DES is still the most widely algorithm used).

4.3. Public Key Certificates and Certificate Authorities


Certificates and Certificate Authorities (CA) are necessary for widespread use of cryptography for e-commerce applications. While a combination of secret and public key cryptography can solve the business issues discussed above, crypto cannot alone address the trust issues that must exist between a customer and vendor in the very fluid, very dynamic e-commerce relationship. How, for example, does one site obtain another party's public key? How does a recipient determine if a public key really belongs to the sender? How does the recipient know that the sender is using their public key for a legitimate purpose for which they are authorized? When does a public key expire? How can a key be revoked in case of compromise or loss?
The basic concept of a certificate is one that is familiar to all of us. A driver's license, credit card, or SCUBA certification, for example, identify us to others, indicate something that we are authorized to do, have an expiration date, and identify the authority that granted the certificate.
As complicated as this may sound, it really isn't! Consider driver's licenses. I have one issued by the State of Vermont. The license establishes my identity, indicates the type of vehicles that I can operate and the fact that I must wear corrective lenses while doing so, identifies the issuing authority, and notes that I am an organ donor. When I drive outside of Vermont, the other jurisdictions throughout the U.S. recognize the authority of Vermont to issue this "certificate" and they trust the information it contains. Now, when I leave the U.S., everything changes. When I am in Canada and many other countries, they will accept not the Vermont license, per se, but any license issued in the U.S.; some other countries may not recognize the Vermont driver's license as sufficient bona fides that I can drive. This analogy represents the certificate chain, where even certificates carry certificates.
For purposes of electronic transactions, certificates are digital documents. The specific functions of the certificate include:
  • Establish identity: Associate, or bind, a public key to an individual, organization, corporate position, or other entity.
  • Assign authority: Establish what actions the holder may or may not take based upon this certificate.
  • Secure confidential information (e.g., encrypting the session's symmetric key for data confidentiality).
Typically, a certificate contains a public key, a name, an expiration date, the name of the authority that issued the certificate (and, therefore, is vouching for the identity of the user), a serial number, any pertinent policies describing how the certificate was issued and/or how the certificate may be used, the digital signature of the certificate issuer, and perhaps other information.





FIGURE 4: GTE Cybertrust Global Root-issued certificate as viewed
by Netscape Navigator V4.


A sample abbreviated certificate is shown in Figure 4. This is a typical certificate found in a browser; while this one is issued by GTE Cybertrust, many so-called root-level certificates can be found shipped with browsers. When the browser makes a connection to a secure Web site, the Web server sends its public key certificate to the browser. The browser then checks the certificate's signature against the public key that it has stored; if there is a match, the certificate is taken as valid and the Web site verified by this certificate is considered to be "trusted."
TABLE 2. Contents of an X.509 V3 Certificate.
    version number
    certificate serial number
    signature algorithm identifier
    issuer's name and unique identifier
    validity (or operational) period
    subject's name and unique identifier
    subject public key information
    standard extensions
      certificate appropriate use definition
      key usage limitation definition
      certificate policy information
    other extensions
      Application-specific
      CA-specific




The most widely accepted certificate format is the one defined in International Telecommunication Union Telecommunication Standardization Sector (ITU-T) Recommendation X.509. Rec. X.509 is a specification used around the world and any applications complying with X.509 can share certificates. Most certificates today comply with X.509 Version 3 and contain the information listed in Table 2.
Certificate authorities are the repositories for public-keys and can be any agency that issues certificates. A company, for example, may issue certificates to its employees, a college/university to its students, a store to its customers, an Internet service provider to its users, or a government to its constituents.
When a sender needs an intended receiver's public key, the sender must get that key from the receiver's CA. That scheme is straight-forward if the sender and receiver have certificates issued by the same CA. If not, how does the sender know to trust the foreign CA? One industry wag has noted, about trust: "You are either born with it or have it granted upon you." Thus, some CAs will be trusted because they are known to be reputable, such as the CAs operated by AT&T, BBN, Canada Post Corp., CommerceNet, GTE Cybertrust, MCI, Nortel EnTrust, Thawte, the U.S. Postal Service, and VeriSign. CAs, in turn, form trust relationships with other CAs. Thus, if a user queries a foreign CA for information, the user may ask to see a list of CAs that establish a "chain of trust" back to the user.
One major feature to look for in a CA is their identification policies and procedures. When a user generates a key pair and forwards the public key to a CA, the CA has to check the sender's identification and takes any steps necessary to assure itself that the request is really coming from the advertised sender. Different CAs have different identification policies and will, therefore, be trusted differently by other CAs. Verification of identity is just of many issues that are part of a CA's Certification Practice Statement (CPS) and policies; other issues include how the CA protects the public keys in its care, how lost or compromised keys are revoked, and how the CA protects its own private keys.

4.4. Summary


The paragraphs above describe three very different trust models. It is hard to say that any one is better than the others; it depend upon your application. One of the biggest and fastest growing applications of cryptography today, though, is electronic commerce (e-commerce), a term that itself begs for a formal definition.
PGP's web of trust is easy to maintain and very much based on the reality of users as people. The model, however, is limited; just how many public keys can a single user reliably store and maintain? And what if you are using the "wrong" computer when you want to send a message and can't access your keyring? How easy it is to revoke a key if it is compromised? PGP may also not scale well to an e-commerce scenario of secure communication between total strangers on short-notice.
Kerberos overcomes many of the problems of PGP's web of trust, in that it is scalable and its scope can be very large. However, it also requires that the Kerberos server have a priori knowledge of all client systems prior to any transactions, which makes it unfeasible for "hit-and-run" client/server relationships as seen in e-commerce.
Certificates and the collection of CAs will form a Public Key Infrastructure (PKI). In the early days of the Internet, every host had to maintain a list of every other host; the Domain Name System (DNS) introduced the idea of a distributed database for this purpose and the DNS is one of the key reasons that the Internet has grown as it has. A PKI will fill a similar void in the e-commerce and PKC realm.
While certificates and the benefits of a PKI are most often associated with electronic commerce, the applications for PKI are much broader and include secure electronic mail, payments and electronic checks, Electronic Data Interchange (EDI), secure transfer of Domain Name System (DNS) and routing information, electronic forms, and digitally signed documents. A single "global PKI" is still many years away, that is the ultimate goal of today's work as international electronic commerce changes the way in which we do business in a similar way in which the Internet has changed the way in which we communicate.



5. CRYPTOGRAPHIC ALGORITHMS IN ACTION


The paragraphs above have provided an overview of the different types of cryptographic algorithms, as well as some examples of some available protocols and schemes. Table 3 provides a list of some other noteworthy schemes employed — or proposed — for a variety of functions, most notably electronic commerce. The paragraphs below will show several real cryptographic applications that many of us employ (knowingly or not) everyday for password protection and private communication.


TABLE 3. Other Crypto Algorithms and Systems of Note.
CapstoneA now-defunct U.S. National Institute of Standards and Technology (NIST) and National Security Agency (NSA) project under the Bush Sr. and Clinton administrations for publicly available strong cryptography with keys escrowed by the government (NIST and the Treasury Dept.). Capstone included in one or more tamper-proof computer chips for implementation (Clipper), a secret key encryption algorithm (Skipjack), digital signature algorithm (DSA), key exchange algorithm (KEA), and hash algorithm (SHA).
ClipperThe computer chip that would implement the Skipjack encryption scheme. See also EPIC's The Clipper Chip Web page.
Escrowed Encryption Standard (EES)Largely unused, a controversial crypto scheme employing the SKIPJACK secret key crypto algorithm and a Law Enforcement Access Field (LEAF) creation method. LEAF was one part of the key escrow system and allowed for decryption of ciphertext messages that had been legally intercepted by law enforcement agencies. Described more in FIPS 185.
Federal Information Processing Standards (FIPS)These computer security- and crypto-related FIPS are produced by the U.S. National Institute of Standards and Technology (NIST) as standards for the U.S. Government.
Fortezza (formerly called Tessera)A PCMCIA card developed by NSA that implements the Capstone algorithms, intended for use with the Defense Messaging Service (DMS).
GOSTGOST is a family of algorithms that is defined in the Russian cryptographic standards. Although most of the specifications are written in Russian, a series of RFCs describe some of the aspects so that the algorithms can be used effectively in Internet applications:
  • RFC 4357: Additional Cryptographic Algorithms for Use with GOST 28147-89, GOST R 34.10-94, GOST R 34.10-2001, and GOST R 34.11-94 Algorithms
  • RFC 5830: GOST 28147-89: Encryption, Decryption, and Message Authentication Code (MAC) Algorithms
  • RFC 5831: GOST R 34.11-94: Hash Function Algorithm
  • RFC 5832: GOST R 34.10-2001: Digital Signature Algorithm
Identity-Based Encryption (IBE)Identity-Based Encryption was first proposed by Adi Shamir in 1984, and is a key authentication system where the public key can be derived from some unique information based upon the user's identity. In 2001, Dan Boneh (Stanford) and Matt Franklin (U.C., Davis) developed a practical implementation of IBE based on elliptic curves and a mathematical construct called the Weil Pairing. In that year, Clifford Cocks (GCHQ) also described another IBE solution based on quadratic residues in composite groups.
IP Security Protocol (IPsec)The IPsec protocol suite is used to provide privacy and authentication services at the IP layer. An overview of the protocol suite and of the documents comprising IPsec can be found in RFC 2411. Other documents include:
  • RFC 4301: IP security architecture.
  • RFC 4302: IP Authentication Header (AH), one of the two primary IPsec functions; AH provides connectionless integrity and data origin authentication for IP datagrams and protects against replay attacks.
  • RFC 4303: IP Encapsulating Security Payload (ESP), the other primary IPsec function; ESP provides a variety of security services within IPsec.
  • RFC 4304: Extended Sequence Number (ESN) Addendum, allows for negotiation of a 32- or 64- bit sequence number, used to detect replay attacks.
  • RFC 4305: Cryptographic algorithm implementation requirements for ESP and AH.
  • RFC 5996: The Internet Key Exchange (IKE) protocol, version 2, providing for mutual authentication and establishing and maintaining security associations.
    • IKE v1 was described in three separate documents, RFC 2407 (application of ISAKMP to IPsec), RFC 2408 (ISAKMP, a framework for key management and security associations), and RFC 2409 (IKE, using part of Oakley and part of SKEME in conjunction with ISAKMP to obtain authenticated keying material for use with ISAKMP, and for other security associations such as AH and ESP). IKE v1 is obsoleted with the introdcution of IKEv2.
  • RFC 4307: Cryptographic algoritms used with IKEv2.
  • RFC 4308: Crypto suites for IPsec, IKE, and IKEv2.
  • RFC 4309: The use of AES in CBC-MAC mode with IPsec ESP.
  • RFC 4312: The use of the Camellia cipher algorithm in IPsec.
  • RFC 4359: The Use of RSA/SHA-1 Signatures within Encapsulating Security Payload (ESP) and Authentication Header (AH).
  • RFC 4434: Describes AES-XCBC-PRF-128, a pseudo-random function derived from the AES for use with IKE.
  • RFC 2403: Describes use of the HMAC with MD5 algorithm for data origin authentication and integrity protection in both AH and ESP.
  • RFC 2405: Describes use of DES-CBC (DES in Cipher Block Chaining Mode) for confidentiality in ESP.
  • RFC 2410: Defines use of the NULL encryption algorithm (i.e., provides authentication and integrity without confidentiality) in ESP.
  • RFC 2412: Describes OAKLEY, a key determination and distribution protocol.
  • RFC 2451: Describes use of Cipher Block Chaining (CBC) mode cipher algorithms with ESP.
  • RFCs 2522 and 2523: Description of Photuris, a session-key management protocol for IPsec.
IPsec was first proposed for use with IP version 6 (IPv6), but can also be employed with the current IP version, IPv4.
(See more detail about IPsec below in Section 5.6.)
Internet Security Association and Key Management Protocol (ISAKMP/OAKLEY)ISAKMP/OAKLEY provide an infrastructure for Internet secure communications. ISAKMP, designed by the National Security Agency (NSA) and described in RFC 2408, is a framework for key management and security associations, independent of the key generation and cryptographic algorithms actually employed. The OAKLEY Key Determination Protocol, described in RFC 2412, is a key determination and distribution protocol using a variation of Diffie-Hellman.
KerberosA secret-key encryption and authentication system, designed to authenticate requests for network resources within a user domain rather than to authenticate messages. Kerberos also uses a trusted third-party approach; a client communications with the Kerberos server to obtain "credentials" so that it may access services at the application server. Kerberos V4 uses DES to generate keys and encrypt messages; DES is also commonly used in Kerberos V5, although other schemes could be employed.Microsoft added support for Kerberos V5 — with some proprietary extensions — in Windows 2000. There are many Kerberos articles posted at Microsoft's Knowledge Base, notably "Basic Overview of Kerberos User Authentication Protocol in Windows 2000," "Windows 2000 Kerberos 5 Ticket Flags and KDC Options for AS_REQ and TGS_REQ Messages," and "Kerberos Administration in Windows 2000."
Keyed-Hash Message Authentication Code (HMAC)A message authentication scheme based upon secret key cryptography and the secret key shared between two parties rather than public key methods. Described in FIPS 198 and RFC 2104.
Message Digest Cipher (MDC)Invented by Peter Gutman, MDC turns a one-way hash function into a block cipher.
MIME Object Security Standard (MOSS)Designed as a successor to PEM to provide PEM-based security services to MIME messages.
NSA Suite B CryptographyAn NSA standard for securing information at the SECRET level. Defines use of:
  • Advanced Encryption Standard (AES) with key sizes of 128 and 256 bits, per FIPS PUB 197 for encryption
  • The Ephemeral Unified Model and the One-Pass Diffie Hellman (referred to as ECDH) using the curves with 256 and 384-bit prime moduli, per NIST Special Publication 800-56A for key exchange
  • Elliptic Curve Digital Signature Algorithm (ECDSA) using the curves with 256 and 384-bit prime moduli, per FIPS PUB 186-3 for digital signatures
  • Secure Hash Algorithm (SHA) using 256 and 384 bits, per FIPS PUB 180-3 for hashing
RFC 6239 describes Suite B Cryptographic Suites for Secure Shell (SSH).
Pretty Good Privacy (PGP)A family of cryptographic routines for e-mail and file storage applications developed by Philip Zimmermann. PGP 2.6.x uses RSA for key management and digital signatures, IDEA for message encryption, and MD5 for computing the message's hash value; more information can also be found in RFC 1991. PGP 5.x (formerly known as "PGP 3") uses Diffie-Hellman/DSS for key management and digital signatures; IDEA, CAST, or 3DES for message encryption; and MD5 or SHA for computing the message's hash value. OpenPGP, described in RFC 2440, is an open definition of security software based on PGP 5.x.(See more detail about PGP below in Section 5.5.)
Privacy Enhanced Mail (PEM)Provides secure electronic mail over the Internet and includes provisions for encryption (DES), authentication, and key management (DES, RSA). May be superseded by S/MIME and PEM-MIME. Developed by IETF PEM Working Group and defined in four RFCs:
  • RFC 1421: Part I, Message Encryption and Authentication Procedures
  • RFC 1422: Part II, Certificate-Based Key Management
  • RFC 1423: Part III, Algorithms, Modes, and Identifiers
  • RFC 1424: Part IV, Key Certification and Related Services
Private Communication Technology (PCT)Developed by Microsoft and Visa for secure communication on the Internet. Similar to SSL, PCT supports Diffie-Hellman, Fortezza, and RSA for key establishment; DES, RC2, RC4, and triple-DES for encryption; and DSA and RSA message signatures. A companion to SET.
Secure Electronic Transactions (SET)A merging of two other protocols: SEPP (Secure Electronic Payment Protocol), an open specification for secure bank card transactions over the Internet, developed by CyberCash, GTE, IBM, MasterCard, and Netscape; and STT (Secure Transaction Technology), a secure payment protocol developed by Microsoft and Visa International. Supports DES and RC4 for encryption, and RSA for signatures, key exchange, and public-key encryption of bank card numbers. SET is a companion to the PCT protocol.
Secure Hypertext Transfer Protocol (S-HTTP)An extension to HTTP to provide secure exchange of documents over the World Wide Web. Supported algorithms include RSA and Kerberos for key exchange, DES, IDEA, RC2, and Triple-DES for encryption.
Secure Multipurpose Internet Mail Extensions (S/MIME)An IETF secure e-mail scheme intended to supercede PEM. S/MIME, described in RFCs 2311 and 2312, adds digital signature and encryption capability to Internet MIME messages.
Secure Sockets Layer (SSL)Developed by Netscape Communications to provide application-independent security and privacy over the Internet. SSL is designed so that protocols such as HTTP, FTP (File Transfer Protocol), and Telnet can operate over it transparently. SSL allows both server authentication (mandatory) and client authentication (optional). RSA is used during negotiation to exchange keys and identify the actual cryptographic algorithm (DES, IDEA, RC2, RC4, or 3DES) to use for the session. SSL also uses MD5 for message digests and X.509 public-key certificates. (Found to be breakable soon after the IETF announced formation of group to work on TLS.)(See more detail about SSL below in Section 5.7.)
Server Gated Cryptography (SGC)Microsoft extension to SSL that provides strong encryption for online banking and other financial applications using RC2 (128-bit key), RC4 (128-bit key), DES (56-bit key), or 3DES (equivalent of 168-bit key). Use of SGC requires a Windows NT Server running Internet Information Server (IIS) 4.0 with a valid SGC certificate. SGC is available in 32-bit Windows versions of Internet Explorer (IE) 4.0, and support for Mac, Unix, and 16-bit Windows versions of IE is expected in the future.
Simple Authentication and Security Layer (SASL)(SASL) is a framework for providing authentication and data security services in connection-oriented protocols (a la TCP). It provides a structured interface and allows new protocols to reuse existing authentication mechanisms and allows old protocols to make use of new mechanisms.It has been common practice on the Internet to permit anonymous access to various services, employing a plain-text password using a user name of "anonymous" and a password of an email address or some other identifying information. New IETF protocols disallow plain-text logins. The Anonymous SASL Mechanism (RFC 4505) provides a method for anonymous logins within the SASL framework.
Simple Key-Management for Internet Protocol (SKIP)Key management scheme for secure IP communication, specifically for IPsec, and designed by Aziz and Diffie. SKIP essentially defines a public key infrastructure for the Internet and even uses X.509 certificates. Most public key cryptosystems assign keys on a per-session basis, which is inconvenient for the Internet since IP is connectionless. Instead, SKIP provides a basis for secure communication between any pair of Internet hosts. SKIP can employ DES, 3DES, IDEA, RC2, RC5, MD5, and SHA-1.
Transport Layer Security (TLS)IETF specification (RFC 2246) intended to replace SSL. Employs Triple-DES (secret key cryptography), SHA (hash), Diffie-Hellman (key exchange), and DSS (digital signatures).(See more detail about TLS below in Section 5.7.)
TrueCryptOpen source, multi-platform cryptography software that can be used to encrypt a file, partition, or entire disk. One of TrueCrypt's more interesting features is that of plausible deniability with hidden volumes or hidden operating systems.(See more detail about TrueCrypt below in Section 5.11.)
X.509ITU-T recommendation for the format of certificates for the public key infrastructure. Certificates map (bind) a user identity to a public key. The IETF application of X.509 certificates is documented in RFC 2459. An Internet X.509 Public Key Infrastructure is further defined in RFC 2510 (Certificate Management Protocols) and RFC 2527 (Certificate Policy and Certification Practices Framework).